Friedrich Universal Remote PDXRC User Manual

Model PDXRC  
Operating Instructions  
HAND HELD REMOTE CONTROL  
This kit contains  
Qty  
For Use With Packaged Terminal Units  
1. Installation instructions ................ 1  
2. Remote control  
3. AAA batteries  
4. Fill piece  
1
2
1
2
Please read these instructions completely before  
attempting installation.  
NOTE: This kit is for use with PD model Friedrich  
PTAC units with SD or later sufxes. For example:  
PDE09K3SD. This kit will not work with prior models.  
5. Screws #8 x 3/8  
Preparing unit for remote control use  
Remote Control Operation  
NOTE: The remote control operation requires the control  
panel door of the PTAC to remain open or be removed  
from the unit. If electing to use the ll piece, follow Steps  
1-4. Otherwise, proceed straight to Step 5.  
POWER - Press the Power button once. The unit will automat-  
ically turn on in the mode and fan speed it was last left on.  
To set mode of operation  
COOL - Press the Cool button to automatically switch the  
operating mode to COOL.  
1) Remove the control panel door from the front grille by  
unhinging it from the grille. This is done by pushing  
back on the top portion of the door until the door is  
released from the hinges.  
HEAT - Press the Heat button to automatically switch the  
operating mode to Heat.  
FAN ONLY - Press the Fan Only button if you want to run  
2) Remove the front grille from the unit.  
the fan only.  
3) Screw the ll piece to the unit using the screws provid-  
COOLER - Press the Cooler button to raise the tempera-  
ture setting one degree.  
ed into the two screw holes above the control panel.  
4) Reattach the front grille.  
WARMER - Press the Warmer button to lower the tem-  
perature setting one degree.  
5) Turn on the PTAC unit  
6) Put batteries in the remote  
To adjust fan speed  
7) The remote control is now ready for operation.  
Low Fan - Press the Low Fan button to adjust the fan  
speed to low.  
8) Your unit should come already enabled to receive the  
remote signal. If after all the steps are done and your  
unit does not respond to remote signal, hold the temp  
High Fan - Press the High Fan button to adjust the fan  
speed to high.  
and the temp  
buttons simultaneously for three  
seconds, or until the display window shows "E" to  
enable the remote.  
Fill Piece Installation  
PDXRC  
Remote  
Control  
Temperature  
Cooler  
Warmer  
Heat  
Power  
Cool  
Low  
Fan  
Fan  
Only  
High  
Fan  
920-172-00 (2-08)  
 

ETA Systems Yard Vacuum ETA C15D User Manual
Fisher Price Lawn Mower K3034 User Manual
FoodSaver Food Saver V2860 1 User Manual
FujiFilm Digital Camera 16395586 User Manual
Gardena Vacuum Cleaner 6000 SP User Manual
Gemini Musical Instrument EX 26 User Manual
GE Range 1908 36 User Manual
GE Ventilation Hood JV394S User Manual
Gianni Industries Door ANSI Box User Manual
Global Machinery Company Planer 420W User Manual